THIEME Foil Laminator
Foil laminator for the lamination of flexible circuits
Flat BED
Foil Laminator
Thieme foil laminator for the lamination of flexible circuits.
- Flexible sensors
- Electrical circuits
Why THIEME Foil Laminator?
- Camera supported alignment of printed substrate
- Controlled lamination pressure
- Configuration to customer demand like heated base plate and lamination roller
- Also suitable for laminating sheets
- Thieme quality „Made in Germany“
Specifics
- Visual alignment support of the printed substrate with camera, monitor and color change
- Table plate as adapter plate for holding the substrate during the lamination process
- Gripper to hold the top foil during lamination
- Blow air support from below to alow an easy removal of the laminated part
- The Thieme laminator will laminate special glue coated lamination foils to a printed film substrate by using a lamination roller with controlled force. The bottom film will be hold in position with vacuum. A pneumatic gripper will hold the top foil in position
- Control via foot switch with front side safety light barrier
- Siemens PLC with touch control panel on the swivel arm
- Switchable vacuum areas
- Individual register pins for substrate alignment
- Heated lamination roller and vacuum plate
Technical data
| Type of machine | Foil Laminator |
|---|---|
| Lamination size [mm] | 700x500 Additional sizes on request |
| Height adjustment vacuum table [mm] | 812,5 to 1062,5 |
| Dimension (W/L/H) [mm] | 1236 x 1800 x 1742-1992 |
| Foil thickness max. [mm] | 0,6 |
| Roller speed adjustable [mm/s] | 50 - 1000 |
| Roller pressure [bar] | 1 till 6 |
| Power supply [V] | 400 / 230 |
| Power consumption | 6,2 kW - 10 A |
| All technical information are not binding and subject to change. | |