THIEME 3000 GS LS
3/4- automatic or fully-automatic flatbed screen printing machine to print on glass and other rigid large-size materials
SCREEN PRINTING SERIES
THIEME 3000 GS LS/LM
3/4- automatic or fully-automatic flatbed screen printing machine to print on glass and other rigid large-size materials.
- It is the perfect machine design for architectural glass
- Due to the large formats the disc transport takes place in longitudinal direction
- Middle or side positioning
- Repeatable positioning of the glass sheets against fixed stops
- Reproducible, programmable print parameters
Specifics
- Modern PLC control allows flexible operation in semi-, ¾- and full automatic mode
- Wear-resistant printing table with blow air support for easy alignment of the glass
- With patented THIEME print head with automatic squeegee pressure alignment
- Movable print head to the rear either partial or over full format size to ensure good accessibility to the printing table for manual loading, positioning and print inspection
- Screen cleaning position 450 mm above the printing table (Optional up to 1000 mm possible)
Technical data
| Type of machine | 3000 GS LS/LM |
|---|---|
| Print size [mm] | from 2000x4000 to 3300x9600 |
| Range of substrate thickness max. [mm] | 3-19 |
| Print speed on request. All technical information are not binding and subject to change. |
|
