BASIC MACHINE CONSTRUCTION - Of welded steel profile, machined and screwed. All outside parts are either    varnished or surface refined.

PRINTING TABLE - Stable construcition with a wearresistant oxide layer of anodized aluminium - Pneumatic lay on pins (rear, left and right side) - Servomotor driven printing table - Table guiding, running on linear ball bearings on hard chromed guide shafts - Precise substrate thickness adjustment is performed via programmable height   control of the print head - Other printing table surfaces and/or reinforced printing tables (thickness 50 mm/2“)   are available on request - Additional rollers can be attached to the table sector

VACUUM SYSTEM - Vacuum generated by way of a lateral channel condenser - Change-over vacuum to blow air solenoid valve - Automatic blow-back - Amount of vacuum- and blow air infinitely adjustable

SCREEN FRAME GUIDANCE SYSTEM (pat.) - The screen frame is inserted via screen support bars - The screen support bars are parallel adjusted by means of a synchronization unit - The clamping of the screen support bars is performed mechanically and released pneumatically - Precise fine tune adjustment performed via 3 mirco spindles within an adjusting range of +/- 10 mm (2/5“) - Screen insertion from the front - Pneumatic frame clamping, electrically supervised

PRINTING HEAD - For smooth action, the parallel lifting of the print head is electronically controlled - Lift height about 35 mm (1.1/2”) - Connectable "Cleaning Position" with Safety Cut-off

THIEME SQUEEGEE UNIT (pat.) - Pneumatic changeover or inversion from squeegee to flood coater, and   vice-versa for each stroke - Pneumatic squeegee pressure control, with automatic adjustment of parallelism   to the plane of theprinting table - Angle of squeegee and flood coater infinitely adjustable, independent of the   squeegee carriagesupport beam - Squeegee diagonal positioning or obliqued squeegee angle is adjustable up to   15 degrees to the squeegee travel direction - Quick-release squeegee and flood coater clamps for rapid insertion or removal - One maximum-length set squeegee and flood coater set according to the machine   size

SQUEEGEE CONTROL - The squeegee carriage guidance with reciprocating linear ball bearings runs on hardened and    precision ground guiding shafts - Squeegee an flood-coater speeds as well as squeegee stroke length are programmable via    electronic control

OFF-CONTACT ADJUSTMENT (programmable) - The off-contact can be precisely adjusted from 4 to 35 mm (5/32“ to 1.2/5“) via   electronic control

PEEL-OFF SYSTEM - Lift height and release position are freely programmable - Horizontal screen position during flooding

CONTROL - Free programmable electronic control - Separate, moveable control display - Holder for Control Display - Keyboard with display - Foot pedal for cycle operation