BASIC FRAME - Of welded steel profile, machined and screwed. All outside parts either varnished or surface refined

PRINT TABLE - Stable construcition with a wearresistant oxide layer of anodized aluminium - Pneumatic lay on pins (rear, left and right side) - Servomotor driven printing table - Table guiding, running on linear ball bearings on hard chromed guide shafts - Precise substrate thickness adjustment is performed via programmable height control of the print head - Other printing table surfaces and/or reinforced printing tables (thickness 50 mm/2“) are available on request

SUBSTRATE TAKE-OFF SYSTEM - Pincer grippers for flexible and rigid materials - Gripper opening dwell times for different sheet format, infinitely programmable - Vacuum-supported take-off conveyor belt can be custom ordered with left or right delivery - Conveyor belt speed infinitely adjustable

VACUUM SYSTEM - Vacuum generated by way of a lateral channel condenser - Change-over vacuum to blow air via solenoid valve - Automatic blow-back - Amount of vacuum- and blow air infinitely adjustable

SCREEN RECEPTION SYSTEM - The screen frame is inserted via screen support bars - The screen support bars are parallel adjusted by means of a synchronization unit - The clamping of the screen support bars is performed mechanically and released pneumatically - Precise fine tune adjustment performed via 3 mirco spindles within an adjusting range of +/- 10 mm (2/5“) - Screen insertion from the front - Pneumatic frame clamping, electrically supervised

PRINT HEAD - For smooth action, the parallel lifting of the print head is electronically controlled - Lift height about 35 mm (1.1/2”) - Connectable cleaning position with safety cut-off

THIEME SQUEEGEE UNIT (Crosswise movement) - Pneumatic inversion from squeegee to flood-coater and vice versa - Pneumatic squeegee pressure control with automatic adjustment of parallelism to print table - Angle of squeegee and flood-coater infinitely adjustable via crank - Diagonal position of squeegee - Squeegee fast tensioning equipment - 1 set squeegees for the maximum print size

SQEEGEE CONTROL - The squeegee carriage guidance with reciprocating linear ball bearings runs on hardened and precision ground guiding shafts - Squeegee an flood-coater speeds as well as squeegee stroke length are programmable via electronic control

OFF-CONTACT ADJUSTMENT (programmable) - The off-contact can be precisely adjusted from 4 to 35 mm (5/32“ to 1.2/5“) via electronic control

PEEL-OFF SYSTEM - Lift height and release position are freely programmable - Horizontal screen position during flooding

CONTROL - Free programmable electronic control - Separate, moveable control display - Keyboard with display - Foot pedal for cycle operation