BASIC MACHINE CONSTRUCTION - Modular construction of the chassis, existing of single profiles - Construction parts of the chassis are anodized - Panellings varnished with RAL 9002 grey-white

PRINTING TABLE - Anodized aluminium surface and aluminium sandwiched construction - Pneumatic lay-on pins, selectable, mounted at rear, left and right side - Table drive via crank gear for smooth starting and slowing-down movements in the end positions - Closed table guiding free from vibrations, running on anodized guiding rails - Feeding time programmable from 0 to 10 sec.

VACUUM SYSTEM - Strong vacuum via lateral channel fan - Change-over via solenoid valve, from vacuum to blow air - Pre-vacuum time infinitely adjustable from 0 to 10 sec. for safe feeding - Vacuum and blow air infinitely adjustable to print different material - Vacuum holes in print table 1.5 mm in diameter, distance of the holes: 15 mm

TAKE-OFF SYSTEM - Pincer grippers for material thickness from 0 to 4 mm. The holding force of the grippers increases   proportionally with the material thickness. - Opening time of the grippers programmable from 0 to 10 sec, depending on the sheet sizes - Choice of take-off positions to rear, left or right side - Programmable transport belt speed

SCREEN FRAME GUIDANCE SYSTEM - Stable master frame, securely mounted and rigid - Screen insertion system from front, adjustable support bars for different frame sizes - Quick and safe pneumatic clamping of frame - Pneumatic clamping of master frame for fine adjustment - Precise fine adjustment via 3 micro spindles, adjusting range +/- 10 mm - Master frame on linear ball bearings for precise adjustment of screen - Feeding at 3 points for exact position of frame, absolutely required if image register system is used

PRINTING HEAD - Parallel lifting of print head, electronically controlled for smooth action.   Height of lift approx. 40 mm - Cleaning position connectable to a height of approx. 500 mm, emergency-off-device

THIEME SQUEEGEE UNIT - Pneumatic inversion from squeegee to flood bar and vice versa - Sensitive, pneumatic squeegee pressure control with automatic adjustment of parallelism - Squeegee and flood bar angle infinitely adjustable via crank - Squeegee quick tensioning device - Squeegee set for max. print size included in delivery

SQUEEGEE DRIVE - The squeegee drive is achieved by a frequency-controlled 3-phase gear motor and toothed belt drive - Programmable squeegee and flood bar speeds - Closed, maintenance-free squeegee carriage guidance - Squeegee stroke (print start and end position) programmable on operation panel

INITIAL SNAP-OFF - For different screen tensioning and material thickness, adjustable via counter timer from 4 to 50 mm

PEEL-OFF DEVICE - Height of screen lift infinitely adjustable from 0 to 4 mm to suit different printing parameters on 200 mm   squeegee stroke - Start of screen lift infinitely adjustable over the whole length of the squeegee stroke

CONTROL - Free programmable control - Separate, moveable control display - Keyboard with display MAC 90 - Foot pedal for cycle operation - Programmable parameters - Storage of 30 different machine programs - Indication of Actual Value for manual setting of machine parameters - Digital sheet counter, counter timer, operating hours counter - Digital indication of operating mode - Indication of service needs - Operating modes: Setting - cycle operation - automatic operation